EGLOO

 [그림필요]

Automatically record 24/7 when using a Cloud or SD card. ( EGLOO A1 supports SD card storage mode only. )

You can watch recorded videos on the app, download video clips, etc.

You can use Schedule Settings to set the time and date when it being recorded. You can record only on the date and time you want to record.

The cloud is priced differently depending on storage and service period. 

When the cloud service expires, it automatically switches to micro SD card storage mode and the camera reboots. 

(It will not be recorded without a micro SD card on the camera. You can only view the live screen.)

Micro SD card needs to be checked for using. Please format if not formatted at first (Setting - SD Card - Formatting)

If the micro SD card is not read, please check if the micro SD card is read properly on the PC.

To receive an alarm, it must be the 'On' setting on 'Settings - Alarm - Motion/Sound' menu.

Motion Detection

- 'Event Settings > Motion' fr|om the menu at the bottom of the live screen.

- Motion areas can be designated up to 8 zones. Motion sensitivity levels can be adjusted separately for each zone. 

The recommended motion sensitivity figure is 85.

Sound Detection

- 'Setting – Video & Audio – Microphone status' must always be 'ON' for sound detection.

- You can adjust the sensitivity level to receive an alarm when detecting a sound.

The EGLOO camera treats continuous sound events as one event, so if you set the sensitivity too high, you can only be notified at the initial sound detection.

You shouldn't raise the sensitivity level to the maximum because you cannot receive any notification except first notificaition. 

If the distance is 1 meter fr|om a target that makes sounds (for example, a baby), you can set the sensitivity to 10 meters and 20 meters for 2 meters.

① If you can't see the screen in the dark, please proceed as below.

- Please check if Settings > Video & Audio > Night Mode is set to 'On or Auto'.

- Check if the camera clicks when changing the night mode 'On/Off' setting.

② When the screen switches between color and black and white,

- Move IR reflective objects (thick blankets, pillows, etc.) within 3.28ft(1m) in front of you to check if this symptom repeats.

- Make sure that Settings > Video & Audio > Night Mode is set to 'On or Auto'.

- Check if the camera clicks when changing the night mode 'On/Off' setting.

③ The video is sent to a red screen.

- At night filter turned on due to external shock.

- Set the camera 'Setting > Video & Audio > Night Mode 'Off' and check the video. 

And save the night mode back to 'Auto' to make sure you can see the live video properly.

④ Even if it is daytime, shown in night mode (black and white)

- Set the camera 'Setting > Video & Audio > Night Mode 'Off' and check the video. 

- And save the night mode back to 'Auto' to make sure you can see the live video properly.

(When set to Auto, please check if the screen is switched to black and white. 

- Sound fr|om Camera : Settings - Video & Audio - Please check speaker volume.

- Sound fr|om smartphone : Settings > Video & Audio > Microphone Settings > On

If you check the sound when the device and smartphone are in the same space, 

Please test it in a different space because the howling phenomenon occurs on the smartphone.

Click the 4-Channel view icon at the top right of the screen and tap the split screen and assign the device. 

You can select and assign one fr|om each of the registered devices. You can monitor the image on the same screen up to 4 cameras.